Specifications

Form Factor

  • ATX Form Factor 305mm x 220mm

CPU

  • Supports the new generation of AMD Socket754 Athlon 64 CPU
  • Processor interface via 6.4GB/s Hyper Transport bus

Chipset

  • NVIDIA nForce3 250

Main Memory

  • Three 184-pin DDR DIMMs up to 2GB
  • Supports DDR266/333/400 modules

Expansion Slots

  • One AGP slot for both 4X/8X AGP
  • Five 32-Bit PCI slots (v2.2 compatible)
  • One CMR(Chaintech Mulmedia Riser) for Chaintech Multimedia Card (CMC5.1)

Audio Subsystem

  • With external high quality 5.1-Channel AC'97 Codec
  • Complete software driver supports for Windows OS
  • Support S/PDIF out

Video Subsystem

  • 4X/8X AGP

UltraDMA IDE Ports

  • Build-in nForce3 250 supports 2 ATA66/100/133 IDE ports

FDD

  • One FDD connector supports up to 2.88MB

Embedded USB Controller

  • Build-in nForce3 250 supports total 6 USB2.0 ports with High-Speed Device@480 Mb/s Transfer Rate

Embedded system monitoring

  • 2 temperature sensing for CPU and system
  • 3 Fan speed monitoring (CPU, system and Chipset)

Boot-Block Flash ROM

  • Award system BIOS supports PnP, APM, DMI, ACPI, & Multi-device booting features

Software

  • Driver CD
  • Value Pack 2004

Other Feature

  • Rear panel I/O ports
    • One PS2 Mouse and Keyboard port
    • Four USB ports and one RJ45 connector
    • Two 9-pin D-Sub male Serial ports
    • One 25-pin D-Sub female Parallel port
    • Audio I/O jacks (Line-in, Line-out and Mic-in)
  • On-board Ethernet
    • On-board LAN controller RTL8100C supports 10/100Mb Fast Ethernet
  • On-board SATA RAID Controller
    • Build-in nForce3 250 supports 2 Serial ATA devices for the highest data transfer rates (1.5Gbps burst) with RAID 0/1 solution
  • On board connector for external device
    • Four 3x1 pin fan connectors
    • 5x2 pin USB connector for additional 2 USB ports
    • 3x1 pin wake on LAN connector with housing
    • 3x1 pin wake on Modem connector with housing
    • Two 4x1 pin CD-in connectors with housing on CMC5.1
    • 4x1 pin Aux-in connector with housing on CMC5.1
    • 9x2 pin front panel connector
    • 5x2 pin front side audio connector
    • 20 pin ATX Power connector
    • 4 pin ATX 12V Power connector

More information on the VNF3-250 can be found on Chaintech's product page.